Dream Property DM600 PVR - Manual (Page 99)

99
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR
english
11.3.7 4 satellites via DiSEqC OPT A/B
Use this type of configuration if you want to receive four satellites from one Twin Universal or
Quad Universal LNB. It does not matter if you use one or two dishes to achieve this. In this
case the LNBs are connected to a so-called Multiswitch from which the signal is via coax
cabled to the satellite receivers in your household. Please read the section Satellite
configuration to learn how to get into this menu.
Choose the upper drop down menu and press the
OK-Button.
A list of all possible configurations will show up.
Select the “4 satellites via DiSEqC OPT A/B” option
and press the OK-Button.
.
Select your desired satellites as described in the
one single satellite – direct connection section.
Make sure you know which satellite is connected to
which input.
If you do not find any services in the transponder
scan later, exchange the two satellites in this list and
try again.
Choose “save” and press the OK-Button.
The configuration for “4 satellites via DiSEqC OPT
A/B” is now done.
The menu “Transponder scan” will show up. See
sections Automatic transponder scan or
Automatic multisat transponder scan for details.