Dream Property DM600 PVR - Manual (Page 52)

52
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR
english
7.3 Recording
7.3.1 Instant recording
The Dreambox DM 600PVR offers you several methods to record a film. The standard
solution is recording onto a built-in hard disk. Additionally you can record via Ethernet using
a so called NFS mount or a NGrab server, if you have no hard disk installed in your
Dreambox. Right now we assume that you have installed a hard disk in your Dreambox.
Attention:
The Infobar will disappear after a short period to
time. Press the OK-Button to reveal it again.
Keep in mind that you have to be in the PVR-Mode to use
these options. You can check this by pressing the OK-Button.
The Infobar will reveal and should show the depicted
control symbols. If they are not shown you simply have
to press the VIDEO-Button once again.
The Infobar does not have to be visible to use the
PVR-Mode.
Select a TV or Radio station from the service list. Activate the PVR Mode by pressing the
Radio-Button (Record). The recording is indicated by a flashing symbol in the Infobar.
During recording you can watch another recording or another channel.
Pressing the Up/Down-Buttons on your remote control activates the service list.
The recording will continue in the background.
Press the VIDEO-Button to access the PVR mode.
During replay you can see the control symbols in
the Infobar.
You can see the control symbols for the PVR-
Mode on you remote control below the Options-
Buttons.
In PVR-Mode the Options-Buttons are mapped
as described below:
Red Options-Button = Rewind
Green Options-Button = Play
Yellow Options-Button = Pause
Blue Options-Button = Forward
TV-Button = Stop