Dream Property DM500 + - Manual (Page 34)

34
U s e r M a n u a l D r e a m b o x D M 5 0 0 english
21.1 Manual transponder scan (DM 500-C)
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD
menu. Navigate to the option “Setup” and press the OK-Button to select.
Navigate to the option “Service Searching” and
press the OK-Button.
Navigate to the option “Manual Transponder Scan”
and press the OK-Button.
Enter the desired frequency with the Numeric
Keypad on your remote control.
Use the Navigation-Buttons to reach the individual
options.
Press the green Options-Button to start the scan.