Dream Property DM500 + - Manual (Page 47)

47
U s e r M a n u a l D r e a m b o x D M 5 0 0 english
26. Automatic transponder scan (DM 500-S)
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD
menu. Navigate to the option “Setup” and press the OK-Button to select.
Navigate to the option “Service Searching” and
press the OK-Button.
Navigate to the option “Automatic Transponder
Scan” and press the OK-Button.
This option is primarily used for only scanning a
single satellite in your list.
Please select the option “Automatic Multisat Scan” if
you want to scan for services on all set satellites at
once. See section Automatic Multisat Scan for
details.
Select one of the two satellites in the drop down
menu and press the OK-Button.