Setting the teletext (tuxtext) position – Dream Property DM500 + User Manual
Page 80
80
U s e r M a n u a l D r e a m b o x D M 5 0 0
english
36.3 Setting the teletext (TuxText) position
Please read the section OSD settings to learn how to get into this menu.
What is TuxText? TuxText is a Plugin (additional Software), which allows the Dreambox to
decode the digital Teletext. TuxText is faster and easier to use than the regular teletext that
is build in to your TV screen.
This menu is used to adjust the position of the TuxText. Maybe the clock does not appear or
the text pages are not shown in the middle of the screen.
Press the yellow Options-Button to enter the
TuxText position setup.
You see the blue screen as depicted on the left.
Press the red Options-Button to select the upper
left corner.
Use the Navigation-Buttons to move the rectangle
in the upper left corner.
Press the green Options-Button to select the lower
right corner.
Use the Navigation-Buttons to move the rectangle
in the lower right corner.
Once the positions are set press the OK-Button to
save the settings.
Attention:
If you don’t see any rectangle, then they are
out of range. Please adjust the rectangle
towards the middle of the screen..