Dream Property DM500 + User Manual
Page 43
43
U s e r M a n u a l D r e a m b o x D M 5 0 0
english
Hint:
If you do not want to change the satellite position list
before hand, just select the option “Single satellite –
direct connection” and choose “Yes” in case you are
prompted the message on the left.
.
You will now see the configuration menu depicted
on the right.
Choose “Non standard – user defined configuration”
in the upper drop down menu. Press the OK-
Button.
For now you will only see one satellite in the list.
Please select LNB 0 and press the OK-Button.
Astra 19.2° Ost is preset for your convenience.
The sub menu “LNB configuration” will show up.
Please change nothing here for now. Except in
cause your coax cable to the LNB has a too high
damping value you can check the checkbox in front
of “Higher voltage”. Usually this is not necessary..
Now please press the blue Options-Button to get
to the next sub menu.