Dream Property DM500 + - Manual (Page 35)

35
U s e r M a n u a l D r e a m b o x D M 5 0 0 english
22. Satfinder
(Adjusting your dish, DM 500-S)
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD
menu. Navigate to the option “Setup” and press the OK-Button to select.
Navigate to the option “Service Searching” and
press the OK-Button.
Navigate to the option “Satfind” and press the OK-
Button.
Select the satellite and transponder in the drop down
menu and press the OK-Button.
Adjust the dish towards the desired satellite until you
have a high value on the signal strength AGC and
on the signal quality SNR indicator. The BER should
always indicate a value of zero if the satellite is
locked and synced.
.