Dream Property DM500 + - Manual (Page 74)

74
U s e r M a n u a l D r e a m b o x D M 5 0 0 english
Use the Navigation-Buttons left and right and the
OK-Button to change the values.
Color format:
CVBS(FBAS), RGB (Red, Green, Blue separated),
SVideo (Color- and Brightness signal separated) and
YPbPr (Component signal e.g. for Projectors).
Aspect ratio:
4:3 Letterbox (Standard), (16:9 programs will be
displayed on 4:3 TV’s with black beams at top and
bottom)
4:3 Panscan (16:9 programs will be zoomed to full
high on 4:3 TV’s, parts of the picture on the left and
right side will cut off)
16:9 (programs transmitted in 16:9 will be displayed
automatically in 16:9, on 4:3 TV’s the picture will be
reduced in height)
TV System:
Choose the standard that your TV supports.
PAL; PAL + PAL60;
Multinorm and NTSC.
Test:
Press the blue Options-Button to activate the
testscreen mode. Press the number 1-8 on the
Numeric Keypad to select a testscreen. Press any
other key to quit the testscreen mode.
Press the green Options-Button to save your
settings.
You will be taken back to the “System” menu.
Disable WSS on 4:3:
Check the checkbox to disable zooming on
some 16:9 TV’s during 4:3 transmissions.
AC3 default output:
If a program is transmitted with an AC3 audio
track (e.g. Dolby Digital), the Dreambox
switches automatically to this audio track. The
AC3 signal will only be available at the
optical socket. The Dreambox has no built-in
Dolby Digital Decoder, AC3 signals are not
available on the analog socket, therefor
you need an external Dolby Digital Amplifier to
adjust the volume.