Echelon Enterprise Services 2.0 - Manual (Page 25)

Echelon Enterprise Services 2.0 User’s Guide 15
LNS Server computer. If you send binary data logs from your SmartServer to be converted to .CSV
format and the device resource files for the subject data points are not present, the conversion will fail.
To install NodeBuilder Resource Editor 3.14.02 and LonMark Resource Files 3.13, click the Echelon
i.LON SmartServer 2.0 button in the taskbar to return to the i.LON SmartServer 2.0 installer, click
Echelon NodeBuilder Resource Editor in the Install Products dialog, and then follow the on-screen
instructions.
Activating EES 2.0
To activate EES 2.0, follow these steps:
1. Right-click the EES tray tool icon in the notification area of your desktop and then select Activate
Enterprise Service.
2. The EES Activation dialog opens.
3. Click the link in the dialog (or go to the SmartServer activation Web page at
www.echelon.com/products/cis/activate ), and then enter your SmartServer’s MACID. The
MACID is located on the bottom of your SmartServer hardware device.
If you do not have access to have to the SmartServer hardware, you can find the MAC ID using
the SmartServer’s Web pages. To do this, right-click the local SmartServer at the top of the
navigation pane on the left side of the SmartServer Web interface, point to Setup, and then click
System Info (alternatively, you can click Setup and then click System Info).