Echelon Enterprise Services 2.0 - Manual (Page 77)

Echelon Enterprise Services 2.0 User’s Guide 67
12. Click Submit. If you selected LNS Auto in the Network Management Service property, the
name of the network changes to the name of the LNS network database specified in step 11, the
network icon changes to an LNS server icon, and the synchronization automatically begins.
During the synchronization process, items in the SmartServer tree that are out of sync with the
LNS network database are highlighted yellow. When all the items in the SmartServer tree are
synchronized (not highlighted yellow), the synchronization is complete. Note that you can
continue to use the SmartServer Web interface during the synchronization.
Notes:
• You can view the progress of the synchronization in the navigation pane. To do this, click
Settings to open the Global Settings dialog, and then select the Show Synchronization
Progress in Tree check box. This adds a synchronization status bar to the right of the
network icon in the SmartServer tree that displays the current ratio of items that have already
been synchronized to the total number of items being synchronized. The image is step 15
demonstrates the synchronization status bar.
• You can view a log of the current synchronization in the SmartServer’s console application.
To view the sync log, enter the trace 2 command. For more information on the SmartServer
console application, see Appendix B of the i.LON SmartServer 2.0 User's Guide.
13. If you selected LNS Manual in the Network Management Service property, all the items in the
SmartServer tree are highlighted yellow meaning that they are out of sync with the LNS network
database. Manually synchronize the SmartServer to the LNS network database following these
steps: