Echelon Enterprise Services 2.0 - Manual (Page 35)

Echelon Enterprise Services 2.0 User’s Guide 25
Username Enter the user name for logging in to your SmartServer via HTTP. The
default user name is ilon.
Password Enter the password for logging in to your SmartServer via HTTP. The
default password is ilon.
d. Click OK to add the SmartServer to the IP channel.
e. If the hostname of the SmartServer you are adding is the same as one already in the project
(the default hostname is “SmartServer”), the Enter Name dialog opens. Enter a different
hostname such as “SmartServer 2”, or append the location of the SmartServer to the default
hostname such as “SmartServer_myQuickMart”, and then click OK. This does not change
the configured hostname of the SmartServer.
f. If the i.LON AdminServer cannot access the SmartServer you are adding, the SOAP Settings
dialog re-opens. Follow these steps: