Echelon Enterprise Services 2.0 - Manual (Page 76)

66 Using the LNS Proxy Web Service
9. In the LNS Network dialog, select the LNS network database to which the SmartServer is to be
synchronized and then click Finish.
10. The Use LNS Network Interface property check box is selected and the network interface used
for communication between the LNS Server and the network is specified automatically. Accept
these defaults if the LNS Server is attached to the physical network and you want the SmartServer
to communicate with the devices on the network through the selected network interface.
11. If the Use LNS Network Interface property check box is selected, the Network Management
Mode property is set to OnNet automatically. This means that network changes are propagated to
the network immediately. Click OffNet to store network changes in the selected LNS network
database and propagate them to the network when you place the SmartServer OnNet.