Echelon Enterprise Services 2.0 - Manual (Page 75)

Echelon Enterprise Services 2.0 User’s Guide 65
5. In the Network Management Service property, accept the default LNS Auto option. In this
mode, the SmartServer independently initiates communication with the LNS Proxy Web service,
and automatically sends network configuration changes made in the SmartServer tree to the LNS
network database.
You should select this mode as long as a firewall is not blocking the SmartServer’s access to the
port on the LNS Server computer selected for the LNS Proxy Web service (port 80 by default). If
a firewall is blocking access to the LNS Proxy Web service, select the LNS Manual option. For
more information on using LNS Manual mode, see Manually Synchronizing the SmartServer to
an LNS Network Database.
6. In the LNS Server property, select the IP address of the LNS Server you added to the LAN in the
Using the LNS Proxy Web Service section earlier in this chapter.
7. If a dialog for logging in to the LNS Proxy Web service opens, enter the User Name and
Password used by the SmartServer for logging in to the LNS Proxy Web service and then click
OK. You initially specified the user name and password in the Echelon Enterprise Services
installer. If you forgot the user name and password, you can right-click the Echelon Enterprise
Services tray icon in the Notification Area of your computer, and then click Options on the
shortcut menu.
8. The LNS Network dialog opens.