Echelon Enterprise Services 2.0 - Manual (Page 42)

32 Using the i.LON AdminServer
internal App device, create the template, and then copy the template to one or more development
SmartServers that have been set to the factory default settings. After you reboot the deployment
SmartServers, the embedded applications on the on the deployment SmartServers will have the same
configuration (data points, presets, and so on) as those on the development SmartServer.
To create a template, perform the following steps:
1. If there is a LonMaker drawing associated with an LNS network database in the project, verify
that the LonMaker drawing is closed.
2. Right-click your project and click Create Template on the shortcut menu.
3. The Create Template Web page opens.
If your SmartServer is synchronized to an LNS network database, and you are accessing the
i.LON AdminServer on an LNS Server/EES 2.0 computer that is different than the one that
contains the LNS network database, the template creation will fail. To create the template, access
the i.LON AdminServer on the LNS Server/EES 2.0 computer that contains the LNS network
database. See Using the i.LON AdminServer Remotely for more information.
4. Click Create Template. The time required to create the template depends on the size of the
project. The SmartServer and LNS network database templates will be stored in the
LonWorks\iLON\EnterpriseServices\repository\com\echelon\templates folder on your computer.
• The SmartServer template is saved to a .zip file that is stored in the
LonWorks\iLON\EnterpriseServices\repository\com\echelon\templates\ilon\ilon_image\
<SmartServer host name>-<yyyy-mm-dd>-<template ID> folder, and is named
ilon_image\<SmartServer host name>-<yyyy-mm-dd>-<template ID>.
• The LNS network database template is saved to a .zip file that is stored in the
LonWorks\iLON\EnterpriseServices\repository\com\echelon\backups\lns\lns_db\<LNS