Echelon LonTal Stack - Manual (Page 25)

LonTalk Stack Developer’s Guide 13
This manual describes the software development process for creating a LonTalk
Stack device, which includes the general tasks listed in the following table.
Task Additional Considerations Reference
Install the LonTalk
Developer’s Kit and become
familiar with it
Chapter 2, Getting
Started with the
LonTalk Stack
Developer’s Kit
Load an application image
file with the Neuron
firmware and Layer 2 MIP
onto an Echelon Smart
Transceiver or Neuron Chip.
Chapter 3, Loading
the Echelon Smart
Transceiver or
Neuron Chip
Create the hardware
interface between your host
processor and the Echelon
Smart Transceiver or
Neuron Chip.
Chapter 4,
Designing the Serial
I/O Hardware
Interface