Echelon LonTal Stack - Manual (Page 50)

38 Designing the Serial I/O Hardware Interface
PL 3120
FT 5000
Echelon Smart
Transceiver
TXD
RXD
RESET~
V
DD
9 x 10 kΩ
Your hardware design should include a switch that connects the RESET~ pin to
ground; you press this switch to reset the Echelon Smart Transceiver or Neuron
Chip.
When you press the reset switch for a LonTalk Stack device, the Neuron
firmware performs reset processing, as described in the data books for the
Echelon Smart Transceiver and Neuron Chips. Then, the Echelon Smart
Transceiver or Neuron Chip performs reset processing that is generally
independent of the host processor.