Elenco Snap Circuits® Deluxe Sound & Light Combo - Manual (Page 66)

-65-
Project 105 Funky Light & Sound
Project 107
Light & Motion
Project 106
Light & Sound
Adjustable Light & Sound
Project 109
Adjustable
Light &
Motion
Project 108
!
WARNING: Moving parts. Do not
touch the fan or motor during
operation.
!
WARNING:
Moving parts. Do not
touch the fan or motor
during operation.
Build the circuit as shown
and turn on the switch
(S1). The color LED (D8)
is used to control the
strobe IC (U23),
producing unusual
effects.
Use the preceding circuit, but replace the
color LED (D8) with the 100kW resistor (R5)
or the 5.1kW resistor (R3).
Repeat projects 105 & 106 but replace the
speaker with the motor (M1) and glow fan
(motor “+” toward S1).
Modify the preceding circuit to match
the one shown here. Use the lever on
the adjustable resistor (RV) to control
the light & sound. At some settings the
white LED (D6) may not light, or will
appear to be on continuously.
Use the preceding circuit, but
replace the speaker with the
motor (M1) and glow fan
(motor “+” toward S1).
SCC-350_Manual_Part_B.qxp 7/25/14 2:05 PM Page 10