EXFO FLS-5800 CD/PMD Analyzer Source - Manual (Page 15)

CD/PMD Analyzer Source 9
3 Getting Started with Your
Light Source
Turning On and Off the CD/PMD Analyzer
Source
To turn on and off the CD/PMD Analyzer Source :
Press the red button located in the lower left-hand corner of the front
panel.
Upon startup, the unit beeps twice, performs a self-test and then displays
the main window with the source deactivated.
When the unit is turned off, the current Setup menu settings remain in a
storage device called non-volatile memory. These settings include display
features and remote control.
W
ARNING
Before turning on the source, please read the Electrical Safety
Information on page 6.