EXFO FLS-5800 CD/PMD Analyzer Source - Manual (Page 66)

Remote Control Commands
60 FLS-5834A
IEEE 488.2 Commands—Description
IEEE 488.2 Commands—Description
*CLS
Description The *CLS command clears the Standard Event
Status Register and the Error/Event Queue.
Syntax *CLS
Parameter(s) None
*ESE
Description The *ESE command sets the Standard Event
Status Enable Register bits, as defined in the
table below. This register contains a mask value
for the bits to be enabled in the Standard Event
Status Register.
Syntax *ESE<wsp><RegisterValue>
Parameter(s) RegisterValue:
The program data syntax for <RegisterValue> is
defined as a <DECIMAL NUMERIC PROGRAM
DATA> element.
The <RegisterValue>, expressed in base 2,
represents the bit values of the Standard Event
Status Enable Register.
PON CME EXE DDE QYE N.U. OPC
MSB LSB Standard Event Status Enable Register
N.U.