EXFO FLS-5800 CD/PMD Analyzer Source - Manual (Page 79)

Remote Control Commands
CD/PMD Analyzer Source 73
IEEE 488.2 Commands—Description
*SRE
Description The *SRE command sets the Service Request
Enable Register bits. See the contents of this
register below. This register contains a mask
value to enable the bits in the Status Byte
Register.
Syntax *SRE<wsp><RegisterValue>
Parameter(s) RegisterValue:
The program data syntax for <RegisterValue> is
defined as a <DECIMAL NUMERIC PROGRAM
DATA> element.
The <RegisterValue> value ranges from 0
through 255.
The <RegisterValue>, expressed in base 2
(binary), represents the bit values of the Service
Request Enable Register.
N.U. N.U. ESB MAV N.U. EAV N.U. N.U.
MSB LSB
Serv ic e R eques t Enable
R egis ter