EXFO FLS-5800 CD/PMD Analyzer Source - Manual (Page 27)

CD/PMD Analyzer Source 21
6 Controlling the Source
Remotely
You can control the CD/PMD Analyzer Source remotely either by:
³
a GPIB interface (through a GPIB cable connected to the GPIB port)
or
³
an RS-232 interface (through a serial cable connected to the serial
port).
Electro-Optical Engineering
R
GPIB IEEE 488.2
SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0, E2
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Made in Canada
P/N
S/N
Ver.
Mfg.
date
QST-151
Serial Port MODEL: GO
LR107723
100-240 V
50/60 Hz
2 A
F2AL250 V
C US
Serial port (RS-232 DTE) Fuse holder
Power
inlet
GPIB port
Ground