EXFO FTB -5240S/5240BP Optical Spectrum Analyzer for FTB 500 (NS-1434) - Manual (Page 495)

SCPI Command Reference
Optical Spectrum Analyzer 487
Product-Specific Commands—Description
:MMEMory[1..n]:LOAD:CONFiguratio
Description This command loads a configuration file.
For this command to be accepted, the OSA
module must be in Ready state with no
acquisition in progress.
This command is an event and has no associated
*RST condition or query form. However, most
settings affected by this command are set to
default values at *RST.
Syntax :MMEMory[1..n]:LOAD:CONFiguratio<wsp><Fil
ename>
Parameter(s) Filename:
The program data syntax for <Filename> is
defined as a <STRING PROGRAM DATA>
element.
Selects the configuration file to load.
The <Filename> parameter can either be only
the filename or the name and its path.
If no path is specified, the default path is used.
The default path name depend on location of
driver libraries.
Example(s) MMEM:LOAD:CONF "config001.osawdmsetup"
See Also MMEMory[1..n]:STORe:CONFiguration