7 smart mode, 7smart mode – EXFO FTB-8100 Series Transport Blazer for FTB-200 User Manual
Page 95
SONET/SDH Application
83
7
Smart Mode
SmartMode allows to automatically identify the structure of the selected
SONET/SDH signal rate that is connected to the Transport Blazer module.
The identified signal structure can then, be used to simplify the setup of a
test case. SmartMode allows also to monitor the basic SONET/SDH
alarms/errors of each layer of the discovered signal structure.
Note: SmartMode is not available when a test is running. No other test functions
are available when SmartMode is running (Smart Scan, Trib Scan or Alarm
Scan).
The Smart Mode window is displayed by default when the GUI is started
The following sections describe the SmartMode usage:
³
SmartMode Interface Description on page 84
³
Using SmartMode for Alarm/Error Monitoring on page 87
³
Creating and Starting a Test Case Using SmartMode on page 94
³