EXFO FTB/IQS-85100G Packet Blazer for FTB-500/IQS-600 - Manual (Page 108)

Test Setup - Test Configurator, Timer, and System
98 FTB/IQS-85100G
MAC/IP/UDP
Modify Frame Structure
Allows to modify the structure of the frame.

Global Option
1
IP Version allows to select IPv4 (default) or IPv6 that will be used for
both the interface and streams/services.

Framing

Frame Format (layer 2) is set to Ethernet II.

Network Layer (layer 3) sets the network traffic type:
IPv4 (default)/IPv6, or None.

Transport Layer is disabled when the Network Layer is None.

VLAN - The VLAN Tag check box when selected (cleared by default),
enables up to 3 stacked VLAN.
See VLAN on page 100 for additional VLAN settings.
1. Only available with EtherSAM and Traffic Gen & Mon test applications.
Test Application Transport Layer
EtherSAM None, UDP (default)
RFC 2544 UDP
EtherBERT UDP
Traffic Gen & Mon None, UDP (default)