Gfp frames, Traffic / traffic ethernet – EXFO FTB/IQS-85100G Packet Blazer for FTB-500/IQS-600 User Manual
Page 243

Test Results
Packet Blazer
233
Summary
Note: When a disruption event is equal or longer than the test period which is
fixed to 5 minutes, then the measured disruption time is equal to the test
period.
SDT Threshold (ms) allows to enter the SDT threshold value that will
be used to declare the pass/fail verdict: 0.005 to 299999.995 ms in step
of 0.005 ms (default is 50 ms). This setting is only accessible when
Pass/Fail Verdict is enabled and is coupled with the SDT Threshold set
from the test setup (refer to page 65).
GFP Frames
GFP Frames are available for OTN BERT with Ethernet 1 GbE, 10 GbE or
Ethernet (flex/GFP-F) client (see GFP-F/GFP-T on page 208).
Traffic / Traffic Ethernet
Note: The Traffic statistics are available for Smart Loopback and OTN BERT
(with EoOTN client) test applications. See Traffic - Ethernet on page 245 for
more information.