EXFO FTB/IQS-85100G Packet Blazer for FTB-500/IQS-600 - Manual (Page 215)

Test Results
Packet Blazer 205
Alarms/Errors

Period
For GFP layer, allows to set the alarm period associated with the client
management frames: 10 ms to 1200 ms (default is 100 ms).

User-Defined UPI available with GFP layer, allows entering the Client
Management Frame UPI value when GFP-User-Defined CMF alarm is
selected.

Inject button
For Manual mode: Manually generates the selected errors according to
the defect and the amount selected.
For Rate and Max Rate: Generates respectively the selected error at
the rate specified or at its theoretical maximum rate.
Note: The selected alarm/error as well as its injection mode and status are
displayed next to the Inject button.

The open/close pop-up button allows to respectively expand (up
arrow) or collapse (down arrow) a pop-up allowing to set the
alarm/error injection parameters.
UPI Description for PTI = 100
0000 0000 and 1111 1111 Reserved
0000 0001 Client Signal Fail (Loss of Client Signal)
0000 0010 Client Signal Fail (Loss of Client Character
Synchronization)
0000 0011 through 1111 1110 Reserved for future use