EXFO FTB/IQS-85100G Packet Blazer for FTB-500/IQS-600 - Manual (Page 413)

Packet Blazer 403
C Remote ToolBox
Overview
The Remote ToolBox application allows to remotely control a module
installed on a platform platform using a remote PC. Remote users are
connected to the platform using an Ethernet connection.
Note: The remote control feature has to be enabled for the module on its specific
slot on the platform platform. Refer to the Controlling Modules Remotely
section from the platform user guide for more information.
The Remote ToolBox allows to start one or several module application(s).
Once a module application is started, the application is independent and
does not require the Remote ToolBox anymore. Thus, the Remote
ToolBox application can be closed or can be disconnected from the
platform using the Disconnect button without affecting the running remote
module applications.