EXFO FTB/IQS-85100G Packet Blazer for FTB-500/IQS-600 - Manual (Page 193)

Test Results
Packet Blazer 183
Alarms/Errors
Interface
Alarms

LOS
1
(Loss Of Signal)
RX: Absence of an input signal or an all-zeros pattern is received.

LOC Lane
2
(Loss Of Clock Lane)
RX: The module is unable to lock on the Physical/CAUI/XLAUI link
interface.

Frequency
2
RX: The received signal frequency meets the standard specifications
(green) or not (red).
For parallel interfaces:
For serial interfaces:
1. Available for each Optical Lane for parallel interface.
2. Available for each Physical Lane for parallel interface.
Rate Optic Type Frequency
40GE 4x10G 10.3125 Gbit/s ± 100 ppm
OTU3 4x10G 10.7546 Gbit/s ± 20 ppm
OTU3e1 4x10G 11.1427 Gbit/s ± 20 ppm
OTU3e2 4x10G 11.1458 Gbit/s ± 20 ppm
100GE 10x10G, 4 x 25G 10.3125 Gbit/s ± 100 ppm
OTU4 10x10G, 4 x 25G 11.181 Gbit/s ± 20 ppm
Interface Standard Rate Specification
OC-768/STM-256 39.81312 Gbit/s ± 20 ppm
OTU3 10.7546 Gbit/s ± 20 ppm
OTU3e1 11.1427 Gbit/s ± 20 ppm
OTU3e2 11.1458 Gbit/s ± 20 ppm