EXFO MaxTester MAX-630 - Manual (Page 11)

Introducing the MaxTester 630
VDSL2/ADSL2+ Multi-play Test Set 5
Cable Connections
Cable Connections
The graphics below show the connectors on the MAX-630 device.
Note: When connecting a DSL cable to the DSL port, use the RJ-11 plug end of the
26 AWG cable provided with the unit. There is a 1500 V maximum transient
voltage on telecom ports. Basic insulation is needed for external telecom
circuits.
Note: For the connection setup, Annex B is on DSL pair 1 and Annex A is on pair 2.
(Dual Annex A and B units only)
Ethernet LAN port
Ethernet WAN port DSL port