EXFO MaxTester MAX-630 - Manual (Page 61)

Setting Up DSL/IP Tests
VDSL2/ADSL2+ Multi-play Test Set 55
Setup
Setup
The Setup function displays the following sub-menu:

Modem Settings allows you to set the display and
power parameters of the modem.

Application Settings allows you to preset the unit
with specific DSL measurement values.

VoIP Phone Book includes pages to setup and
save phone numbers for the VoIP test.
Modem Settings
Modem Settings provide the means to configure the
unit power scheme.

Display Modem allows you to display the modem
state in the title bar of the unit. Default value is
Yes.

Modem Power OFF:

Immediately for when a DSL/IP test is
completed or stopped. In this mode, the
modem is powered on when DSL/IP test
starts.

Idle values power off the modem within a
defined period after an DSL/IP test is completed or stopped.

If your modem is V2XAB, then DSLAM entry is visible and allows you to
choose the following:

Annex B

UR2

Annex B and UR2