EXFO MaxTester MAX-630 - Manual (Page 66)

Setting Up DSL/IP Tests
60 MAX-630
Setup
File Name
The File Name tab sets up the standard configuration
for automatically naming a result file. You can only
Enable/Disable the entries. All enabled entries are
considered for file name generation.

File Name Preview displays a preview of the file
name. The actual values of the enabled entries
are not shown.

Date and Time value format depends on the
format selected in System Settings. This entry
cannot be disabled.

Separator allows you to choose a value to
separate the enabled entries in the file name, e.g.: Space ( ), Dash (-),
Underscore (_).
To select an entry and choose a value:
1. Press the up/down arrow keys to highlight the desired entry.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press on a value to open a list box of options.
4. Press the up/down arrow keys to select the option and press to
confirm your selection.