EXFO MaxTester MAX-630 - Manual (Page 64)

Setting Up DSL/IP Tests
58 MAX-630
Setup
Identification
The Identification tab allows you to preset values to
identify each single and auto test result file when
saving them. The parameters are as follow:

User Name/User ID allow you to enter up to 25
alphanumeric characters, in each field.

Test From/To list the following values: DSLAM,
NID, CPE, CROSSBOX, FRAME - up to 20 entries
each, including user defined values.

Test From/To List Setup buttons open separate
list management pages.
To select the parameter values:
1. Press the up/down arrow keys to highlight the desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4. Press to confirm the value.