Auto iptv test setup – EXFO MaxTester MAX-630 User Manual
Page 55
Setting Up DSL/IP Tests
VDSL2/ADSL2+ Multi-play Test Set
49
Test Setup
Auto IPTV Test Setup
The Auto IPTV Test Setup page in the IPTV test
setup allows you to define 2 types of IPTV tests to run
automatically:
Join/leave Test - Enable to define a list of
channels to sequentially join and leave. If
disabled, no test is performed.
Channel 1-10 allows you to define a list of
up to 10 channels.
IPTV Channel Analysis - Enable to add
channels for analysis. If disabled, channel
analysis in auto test is not performed.
Stream Time defines the length of time, from 1 to 60 s, to keep the
channel stream(s) for analysis.
Channel 1-5 allows you to define up to 5 IPTV channels for
concurrent analysis.
On-screen function buttons:
Add/Insert is available only when a blank entry is highlighted.
When the button is pressed, the first available channel from the
alias Channel List is automatically added to this list of channels.
Upon highlighting another blank entry, the next channel from the
alias table is added, and so on.
Delete removes the selected channel from the list.
You can Enable either one or both, but you cannot Disable both of them at
same time. If both tests are enabled, Join/leave Test runs first.