Viewing element and section details – EXFO iOLM User Manual
Page 127
Advertising
Managing Results
intelligent Optical Link Mapper
121
Viewing Element and Section Details
Viewing Element and Section Details
When an element or section is selected from the Link View tab, the details
of the corresponding element/section is displayed in the Elements tab.
The loss and reflectance are displayed with appropriate coloring based on
the pass/fail status of each value.
To view the element or section details:
1. From the Link View tab, select the desired element or section.
Note: You can select the section only if the Fiber section(s) option is enabled in
the User Preference window. For more information, see Defining General
Settings on page 23.
Standard measurement
Loopback mode
Advertising