EXFO iOLM User Manual
Page 133
Managing Results
intelligent Optical Link Mapper
127
Managing Elements and Analyzing Links (Optional, iOLM EXpert and Loopback Modes)
4. In the New Element dialog box, configure the element details.
4a. You can add the new element after or before the selected
element. The position can be selected as required in the Location
field.
4b. Select the type of the new element as required.
Note: The 2:N splitter and custom elements are displayed in the element type list
if they are present in the selected iOLM files.
5. Tap OK to apply the changes or Cancel to discard them.
Note: If an element is added, the “*” sign is displayed at the Position and Type
columns in the Elements table.
Note: You can add an element to a group of elements and it will influence the
pass/fail status of the grouped element.