Modifying element pass/fail thresholds – EXFO iOLM User Manual
Page 78
Advertising
Managing Test Configurations
72
iOLM
Modifying a Test Configuration
7. Tap OK to save the changes and close the window, or tap Cancel to
exit without saving.
Tap Revert to Factory Settings to remove all the changes and apply the
default values associated with the selected configuration.
Modifying Element Pass/Fail Thresholds
This tab allows you to apply modifications to the element pass/fail
thresholds.
Note: Pass/Fail thresholds cannot be viewed or edited for some configurations
related to specific standards.
To modify element pass/fail thresholds:
1. From the Main Menu, tap Test Config.
Advertising