EXFO iOLM - Manual (Page 128)

Managing Results
122 iOLM
Viewing Element and Section Details
2. From the main window, tap the Elements tab. You can view the
selected element or section details.
3. Under the Elements tab, the following information is displayed.

Type: The type of element selected in the Link View. You can
modify the type of element by selecting it from the drop down
menu. You can change the splitter ratio if the selected element is a
splitter. You can change the element type to splitter ratio 2:N if the
iOLM EXpert option is activated and the 2:N splitter ratio is present
in the iOLM measurement. If the custom element is defined in the
test configuration used for iOLM acquisition, you can select the
custom element from the element type list. For more information
on custom element, see Managing Custom Elements (Optional,
iOLM EXpert Mode Only) on page 63.

The application displays the beginning of the link and link end
in the element table. If the beginning of the link and link end
are in the same element, the application displays in the
element table. This information is also displayed in the report.