EXFO iOLM - Manual (Page 57)

Managing Test Configurations
intelligent Optical Link Mapper 51
Modifying a Test Configuration
5. The default file name is displayed. You can modify the file name, if
required.
6. Tap Save to save the file or tap Cancel to exit without saving.
Note: A number between parenthesis will be automatically incremented at the
end of the file name to avoid unwanted overwrites.
A new copy of the selected configuration file is created. You can
modify the duplicated file, if required. See Modifying a Test
Configuration on page 51 for more details.
7. Tap Close to close the window.
Modifying a Test Configuration
The Modify button in the Manage main menu allows you to view the
selected configuration file and modify it, if required.
Note: The test configuration settings will be effective for the next acquisition.
Note: If the default factory settings file, or any predefined file is selected, the
Modify button will appear as View, which means that you cannot modify
the factory test configuration files. Also, you cannot modify the files created
by the supervisor, if you are logged in the module as a operator or any user
with lower privileges than supervisor.