EXFO iOLM - Manual (Page 44)

Setting User Preferences
38 iOLM
Customizing the iOLM Report
3. If your unit allows it, select the report file type from File type option.
4. Select the OTDR Graphic option to display the OTDR graph in the
iOLM report.
Note: The OTDR graph generation fails if the iOLM measurement does not
contain the necessary intermediate OTDR data, or if the iOLM acquisition
process is interrupted by the user, or it is self interrupted because of a live
fiber is present in iOLM measurement.
5. Select Fiber section(s) option to display the section information in the
iOLM report.
6. Select Diagnostic option to display the diagnostics information in the
iOLM report.