EXFO FLS-2200 Broadband Source - Manual (Page 144)

IEEE 488.2 and Specific Command Reference
136 FLS-2200
Product-Specific Commands—Description
Product-Specific Commands—Description
:DISPlay:BRIGhtness
Description This command allows you to control the intensity
of the display.
*At RST, the display brightness is at maximum.
Syntax :DISPlay:BRIGhtness<wsp><Brightness>|MAXi
mum|MINimum|DEFault
Parameter(s) Brightness:
The program data syntax for <Brightness> is
defined as a <numeric_value> element. The
<Brightness> special forms MINimum,
MAXimum and DEFault are accepted on input.
MINimum allows to set the instrument to the
smallest supported value.
MAXimum allows to set the instrument to the
greatest supported value.
DEFault allows the instrument to select a value
for the <Brightness> parameter.