EXFO FLS-2200 Broadband Source - Manual (Page 152)

IEEE 488.2 and Specific Command Reference
144 FLS-2200
Product-Specific Commands—Description
:SOURce[1..n]:POWer:STATe
Description This command turns the optical source on or off.
When source is on, the red LED (Active) on the
instrument's front panel lights up.
*RST sets the optical source to OFF.
Syntax :SOURce[1..n]:POWer:STATe<wsp><PowerStat
e>
Parameter(s) PowerState:
The program data syntax for <PowerState> is
defined as a <Boolean Program Data> element.
The <PowerState> special forms ON and OFF
are accepted on input for increased readability.
ON corresponds to 1 and OFF corresponds to 0.
The <PowerState> parameter corresponds to
the sources new power state.
1 or ON, turns the optical source on.
0 or OFF, turns the optical source off.
Example(s) SOUR:POW:STAT ON
Notes You can specify the desired SLED. In SOURce
[1..n], n corresponds to the total number of
SLEDs your unit contains.
See Also SOURce[1..n]:POWer:STATe?