EXFO FLS-2200 Broadband Source - Manual (Page 78)

Maintenance
70 FLS-2200
Upgrading the Embedded Software
6. Go to the “C:\Test” folder and start the upgrade program by typing the
following line (spaces are required between parameters):
Lo0006.exe /C:2 /F:c:\test\filename.hex /S:19200
Parameters can be decoded as follows:

/C: serial port number (COM2 in the above example)

/F: file to copy on your unit (replace “filename” with the actual
name of the .hex file on your hard disk)

/S: computer-to-unit transfer speed (if “19200” does not work, try
“56700”)
7. When a message about waiting for a device handshake appears, turn
on the Broadband Source.
The unit display remains off, the unit beeps once and the upgrade
program starts automatically. A progress bar on the computer screen
indicates the upgrade status. Once the software upgrade is complete,
the message about restarting the unit appears.
8. If the software upgrade was performed under Windows 2000, an error
message to the effect that the LO0006 NTVDM has encountered a
system error and to select close to terminate the application is
displayed. Click Close to hide the dialog box.