EXFO FLS-2200 Broadband Source - Manual (Page 25)

Broadband Source 17
4 Setting Up Your Broadband
Source
The blue button on the right of the display provides access to the
single-level Setup menu. You can access this menu even while the source
is active to set up the various parameters.
Setting the Refresh Rate
To set the refresh rate:
1. Press the Setup button.
2. Use the up/down or left/right arrow keys to select Refresh Rate (the
item will be displayed in reverse video).
3. Press ENTER to access the Refresh Rate edit box.
4. Use the up/down arrow keys to set the refresh rate between 1/2 Hz,
1 Hz, 2 Hz, 4 Hz, 8 Hz and 16 Hz.
5. Press ENTER to confirm the new refresh rate.
Refresh Rate
Backlight
Contrast
Video Mode
8 Hz
ON
STD
Exit
RS232 / GPIB
GPIB Addr.
Baud Rate
Flow Ctrl
GPIB
12
N.A.
N.A.