EXFO FVA-3150 Variable Attenuator - Manual (Page 49)

Operating Your Variable Attenuator
Variable Attenuator 43
Performing an Attenuation Routine
To stop the attenuation routine:
1. Press Program.
2. Press the left/right arrows until STOP is displayed.
3. Press ENTER.
The routine completes the current attenuation step, then stops (Program
disappears from the display).
To know... perform the following steps
how much time is
left in the delay
Press Program
Press the left/right arrows until DELAY is displayed.
how much time is
left in the current
step
Press Program
Press the left/rigth arrows until DURATION is displayed.
how many steps are
left in the current
routine
Press Program
Press the left/rigth arrows until STEP is displayed.