FeiYu Tech FY-3ZT - Manual (Page 15)

GuiLin FeiYu Electronic Technology Co., Ltd.
GuiLin FeiYu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: [email protected]
Page 14
FY-3ZT Power Supply
1. To ensure uninterrupted autopilot function, it is critical that your power system outputs a stable
and clean 5 volt power source to the FY-3ZT system.
2. To avoid current fluctuations, ideally the power source supply to the servos should be separate
from the autopilot.
3. If the power source for the Autopilot system and servos are the same, then we highly
recommend a battery or BEC supply with higher than 3 amps output. Do check this rating
especially if you are using your ESC‘s internal BEC supply as some ESC BECs are not rated for
3amp output.
4. We highly recommend a separate power source for the autopilot system from the receiver and
servos, as this has shown to produce the best results.