FeiYu Tech FY-3ZT - Manual (Page 36)

GuiLin FeiYu Electronic Technology Co., Ltd.
GuiLin FeiYu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: [email protected]
Page 35
GYRO INITIALIZATION via GCS
After activation of the Autopilot system (on the ground) you observe the pitch and roll shown in the
GCS screen does not match the actual pitch and roll of the aircraft you may need to re-initialize the
gyro.
Re-Initialization Procedure
1. Click ‗Gyro init‘.
2. Keep aircraft static for at least 20 seconds
3. Ensure no movement or vibration occurs.
4. After 20 seconds, gyro initialization is complete.
5. Test that the GCS screen now shows correct pitch and roll
movement.