FeiYu Tech FY-3ZT - Manual (Page 37)

GuiLin FeiYu Electronic Technology Co., Ltd.
GuiLin FeiYu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: [email protected]
Page 36
FY-GCS Software Operation Process

Basic Operation Sequence
1. Connect the serial port to the Data Radio.
2. Software installation: please install the MapInfo Map control if the map does not work
properly.
3. Run the Ground Control Software.
4. Go to Menu – select Map and load map by selecting Map with the extension .GST
Example:
5. To set up the Baud rate, open:
"Communication" the "Port" and "Baud rate", set to 19200.
The default baud rate of FY-3ZT is 19200.
6. Click the green ―Connect‖ button from the ―Switch‖
interface.
- A "Save track log" file dialog box will pop up: