FeiYu Tech FY-3ZT - Manual (Page 8)

GuiLin FeiYu Electronic Technology Co., Ltd.
GuiLin FeiYu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: [email protected]
Page 7
FLIGHT CONTROLLER MODULE INSTALLATION
FLIGHT CONTROLLER MODULE
1. The flight Controller Module has no special requirements for installation. It can be placed
anywhere in the airframe as you wish.
2. The Attitude and Heading Reference System (AHRS) & Global Positioning System (GPS)
module must be placed horizontally and as close as possible to the plane‘s CG (Center of
Gravity). The arrow direction must be pointing towards the nose of the plane (i.e. direction of
flight).
3. When installing please make use of the supplied damper mount (shown below). Otherwise
the vibrations will cause a large data inconsistencies which will adversely affect the autopilot
accuracy.
4. FY-3ZT autopilot integrates a GPS module including a flat-GPS passive antenna. This is a
sensitive antenna for GPS signals, while false signals reflected from the ground is effectively
filtered out. Install the GPS unit horizontally.
5. Keep metal objects and other conductive materials such as carbon fibre away from the GPS
unit. Additionally no transmitting antenna should be around the GPS antenna. The
communication link antenna (FY-606) or your video transmitter should be kept as far away
from the GPS unit as possible.
6. Radio transmissions will increase the noise signals which lead to instability in the positioning
data. The higher the radio noise, the more difficult for the GPS to lock in position.
7. FY-3ZT can integrate with either one of Feiyu Tech‘s two Data Radio modules, the FY-606
(2.4 Ghz) or the FY-602(433 mHz).
8. The Data Radio uplink is responsible for receiving flight navigation data from the GCS. At
the same time, the Data Radio also transmits flight status and other remote sensing