FeiYu Tech FY-3ZT - Manual (Page 51)

GuiLin FeiYu Electronic Technology Co., Ltd.
GuiLin FeiYu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: [email protected]
Page 50
Flight Path Setting
1. After the autopilot has attained a lock on the home position, a little red plane will show up on
the map at your current position.
2. Set the current location as return point (H. Point) if you wish.
3. To familiarize yourself with flight path setting, try a very simple autopilot flight plan first.
4. In this example, set a ―Box‖ pattern (above).
5. Ensure that the first tests are done well within visual sight of the plane.
6. When you are more confident with the system is working
properly, you can setup a more complicated flight path.
7. UPLD ROU – After setting the aircraft flight path, store the
flight route to the RAM of the Autopilot by clicking ―UPLD
ROU‖. This flight path will be lost when the autopilot is
powered off.
If you wish to save the flight path for a repeat flight), you can
click ―Route Permanents Storage‖. This will save route even after you power OFF the
autopilot.
Note that you can store only one route in the autopilot RAM at a time. When you save a new
flight route using ―Route Permanents Storage‖, the previous path will be replaced.