Glow-worm Chatsworth 4 - Manual (Page 18)

18 221907C
6 Servicing
5924
Diagram 6.3
THERMOCOUPLE
SPARK GAP
3 + 1 or - 0.5
Make sure this hole is
clear of dust and lint
EARTH POST
ELECTRODE
10123
Diagram 6.4
BURNER ASSEMBLY
(Secure with previously
removed securing screws)
SLIDE UNDER BURNER
SUPPORT TAB
BURNER
BURNER
6.6 Electrode
Ensure that the electrode is in line with the earth post and that
the spark gap is as shown in diagram 6.3.
If damaged replace the safety device as Section 8.10.
6.7 Thermocouple
Inspect the thermocouple for wear and damage, clean with a
soft brush, see diagram 6.3.
If damaged replace the safety device as Section 8.10.
When replacing the burner assembly, refer to diagram 6.4
(Locating burner support tabs).
6.8 Ignition Lead
Inspect the ignition lead for wear and damage, replace if
necessary.
NOTE: When replacing the burner refer to diagram 6.4 (Locating
the burner support tabs).